Volume 27,Issue 4,2010 Table of Contents

   
Other Issues:  
  

Contents

Numerical analysis of fluid flow around diamond cylinders
  FENG Da-kui,ZHANG Zhi-guo,WANG Li and Ashvinikumar V. Mudaliar
  2010,27(4) [Abstract(1314)]  [View PDF 550.12 K (1453)]
  
A consistent element for calculating large deformation of flexible beams
  ZHANG Guo-rong
  2010,27(4) [Abstract(1929)]  [View PDF 423.16 K (1617)]
  
Experimental investigation of the aerodynamic
  ZHANG Guo-qing and YANG Shu-xing
  2010,27(4) [Abstract(1612)]  [View PDF 511.32 K (1251)]
  
Multi-objective optimization of low structural compliance and thermal directional expansion
  WANG Bin,YAN Jun and CHENG Geng-dong
  2010,27(4):577-582 [Abstract(1548)]  [View PDF 944.87 K (1229)]
  
Reliability analysis of MDOF uncertain hysteretic systems with independent failure modes
  ZHANG Yi-min and ZHANG Xu-fang
  2010,27(4):583-589 [Abstract(1767)]  [View PDF 1.01 M (1266)]
  
Solving couple-stress problem via element-free Galerkin method
  YANG Hai-tian,HE Yi-qian and CHEN Guo-sheng
  2010,27(4):590-595 [Abstract(1614)]  [View PDF 854.24 K (1343)]
  
FEM/MLPG coupling algorithm using transform matrices
  LIU Jun,YAN Bo,ZHAO Li and LIU Cheng
  2010,27(4):596-600 [Abstract(1560)]  [View PDF 723.19 K (1247)]
  
Variational multiscale method for the transient convection-diffusion equations
  ZHU Hai-tao and OUYANG Jie
  2010,27(4):601-606 [Abstract(1413)]  [View PDF 907.10 K (1273)]
  
Numerical simulation on the inviscid flowfield of transonic hovering rotor using implicit method and WENO schemes
  XU Li,YANG Ai-ming,DING Jue and WENG Pei-fen
  2010,27(4):607-612 [Abstract(1968)]  [View PDF 868.03 K (1229)]
  
Numerical simulation of the flow-field of an airfoil with eddy-flap
  BAI Ya-lei,MING Xiao and DING Tao
  2010,27(4):613-617 [Abstract(1591)]  [View PDF 980.83 K (1356)]
  
Discussion on method of estimating the effect range of truncation error in large amplitude sloshing of water in rectangular duct
  NIE Li-ying and SHI Xiao-li
  2010,27(4):624-628 [Abstract(1158)]  [View PDF 959.96 K (1117)]
  
Influence of horizontal distance and phase on aerodynamics of dual flapping airfoils in tandem configurations
  ZHOU Xin-chun,ANG Hai-song and XIAO Tian-hang
  2010,27(4):629-633 [Abstract(1723)]  [View PDF 917.40 K (1439)]
  
Influences of two-cylinder heights on their drag coefficients in a rectangle channel
  QIN Peng-gao,ZHU Li-gang,CHEN Zhi-hua and LI Bao-ming
  2010,27(4):634-641 [Abstract(1608)]  [View PDF]
  
Sensitivity analysis based on finite element of B-spline wavelets for composite laminated plates
  XU Jian-xin,LI Ding-he,LU Xiang and QING Guang-hui
  2010,27(4):642-647 [Abstract(1377)]  [View PDF 986.02 K (1361)]
  
Multi-domain synthetic topology optimization method for automotive body spot weld layout design
  LV Yi-ning and LV Zhen-hua
  2010,27(4):648-654 [Abstract(1654)]  [View PDF 1.10 M (1447)]
  
Approximate solutions of static arch beams considering static loads effect
  ZHANG Jia-wei,ZHOU Shi-jun and ZHAO Jian-chang
  2010,27(4):655-660 [Abstract(1626)]  [View PDF 934.09 K (1413)]
  
Mixed sensitivity H controller designing for active flutter suppression
  ZHANG Zi-jian,XU Min and CHEN Shi-lu
  2010,27(4):661-666 [Abstract(1485)]  [View PDF 1.01 M (1367)]
  
Dynamic modeling for a composite plate undergoing large overall motion
  WU Gen-yong and HE Xing-suo
  2010,27(4):667-672 [Abstract(1513)]  [View PDF 994.33 K (1194)]
  
A parallel algorithm of block tridiagonal systems for the initial boundary value problem of 2D-hyperbolic equation
  ZHANG Heng and ZHANG Wu
  2010,27(4):673-676 [Abstract(1262)]  [View PDF 584.58 K (1464)]
  
A high-speed calculating method of the bearing capacity of the latticed column of concrete filled steel tube
  JIANG Li-zhong and ZHOU Wang-bao
  2010,27(4):677-681 [Abstract(1560)]  [View PDF 857.52 K (1320)]
  
A feature preserved triangular mesh simplification method for finite element analysis
  LIU Xiao-dong,DONG Xian-fa,GUO Wei and GUAN Zhen-qun
  2010,27(4):682-687 [Abstract(1503)]  [View PDF 1.07 M (1262)]
  
Finite element analysis of surface through-thickness crack in piezoelectric thin film
  WU Bo,ZHENG Xue-jun,LI Dong-hai and ZHOU Yi-chun
  2010,27(4):688-693 [Abstract(1431)]  [View PDF 984.20 K (1237)]
  
A modified RCM bandwidth optimizing algorithm for FEM analysis
  DU Xian-ting,XIA He,LONG Pei-heng,YU Zhu and WANG Shao-qin
  2010,27(4):694-697 [Abstract(1485)]  [View PDF 774.06 K (1200)]
  
Equivalent column method to calculate critical load for concrete-filled steel tubular arch under pure compression
  WEI Jian-gang,CHEN Bao-chun and WU Qing-xiong
  2010,27(4):698-703 [Abstract(1352)]  [View PDF 1.01 M (1282)]
  
Research on stress intensity factors of surface crack of hollow axles at different depth
  ZHOU Su-xia,ZHANG Jun-qing and XIE Ji-long
  2010,27(4):704-710 [Abstract(1193)]  [View PDF 1.24 M (1254)]
  
Dynamic analysis of port crane in case of modifying amplitude with second-order effect
  XIA Yong-jun and MIAO Qian
  2010,27(4):711-715 [Abstract(1311)]  [View PDF 928.01 K (1231)]
  
Vibration problem of theory of elasticity in Hamilton system under initial stress
  LI Jun-yong and LV He-xiang
  2010,27(4):716-720 [Abstract(1366)]  [View PDF 1.31 M (1220)]
  
Nonlinear stability bearing capacity analysis for a suspended dome based on the initial curvature elements
  ZHOU Zhen,WU Jing and MENG Shao-ping
  2010,27(4):721-726 [Abstract(1305)]  [View PDF 1023.48 K (1175)]
  
Wave responses of floating elastic platesin deep water based on thick plates theory
  ZHAO Cun-bao,LIANG Rui-fen,HUANG Hai-long,ZHANG Yao-hui and ZHU Zhong-ya
  2010,27(4):738-744 [Abstract(1649)]  [View PDF 1017.34 K (1175)]