Numerical study on particle breakage characteristics under blast loading
Received:February 25, 2022  Revised:April 19, 2022
View Full Text  View/Add Comment  Download reader
DOI:10.7511/jslxCMGM202206
KeyWord:CDEM  particle breakage  blast wave  weibull distribution
        
AuthorInstitution
张传山 北京理工大学 爆炸科学与技术国家重点试验室, 北京
冯春 中国科学院 力学研究所 流固耦合系统力学重点试验室, 北京
薛琨 北京理工大学 爆炸科学与技术国家重点试验室, 北京
Hits: 441
Download times: 268
Abstract:
      Experiments indicated that with spherical TNT as the central explosion source,the volume fraction of the particles composed of spherical glass beads and the broken particles in the spherical shell showed an exponential decay law with the increase of the M/C (the mass ratio of the spherical shell of the particle to the mass of the TNT).Using the DEM coupled with FEM,this paper reveals the propagation attenuation of the explosion wave in the particle annular shell after the central explosive is detonated and the sparse unloading process after reflection at the outer interface of the annular shell.Due to the short pulse characteristics of the blast wave,the internal stress field of the particles is always in a state of stress non-equilibrium,and the Weibull distribution of the particle crushing strength in the stress-equilibrium state will be much higher than the volume fraction of the broken particles measured by the test.Therefore,in this paper,the average induced stress rather than the instantaneous induced stress in the characteristic time of the breaking wave propagation is used as the stress index of the particle crushing strength,and the characteristic time of the breaking wave propagation is determined by the test results.In this paper,the influence of the non-uniformity of stress propagation on particle breakage is considered,and the variation law of the probability distribution of the mean induced stress peak value with the proportional distance is obtained.