欢迎光临《计算力学学报》官方网站!
基于边界元法求解三维弹性摩擦接触问题
Solving 3D Elastic Friction Contact Problem by Boundary Element Method
投稿时间:2021-04-05  修订日期:2021-06-21
DOI:
中文关键词:  接触问题  摩擦  边界元法  滑移方向预测  增量法
英文关键词:contact problem  friction  boundary element method  slip direction prediction  incremental method
基金项目:两机专项基础研究课题(J2019-IV-0008);株洲市科技人才托举工程(2019TJ-03);湖南省自然科学基金(2019JJ50700);中国航发集团创新基金(CXPT-2019-002)
作者单位邮编
舒小敏 中国航发湖南动力机械研究所 412002
摘要点击次数: 25
全文下载次数: 0
中文摘要:
      边界元法求解三维摩擦接触问题,其中一个关键点在于如何确定滑移方向。即当出现相对滑移时,滑移方向如何确定。当前常采用的方法是,粘结点利用切向面力得到滑移方向,滑移点利用切向相对位移得到滑移方向。不过该方法难以保证收敛性。针对这一问题,本文采用滑移方向预测技术得到滑移方向。即以后出现相对滑移时,滑移方向采用预测技术中得到的滑移方向。由于摩擦接触问题和历史加载相关,本文采用增量法求解。不同摩擦系数下的数值结果都表明本文解算法的有效性和收敛性及滑移方向预测技术的有效性。
英文摘要:
      In three-dimensional frictional contact problems by boundary element method, one of the key points is how to determine the slip direction. That is, when relative slip occurs, how to determine the direction of slip. Currently, the commonly used method is that the sticking point employs the tangential surface force to obtain the slip direction, and the slipping point employs the tangential relative displacement to obtain the slip direction. However, this method is difficult to guarantee convergence. In response to this problem, this paper adopts the slip direction prediction technology to obtain the slip direction. That is, when relative slip occurs, the slip direction adopts the slip direction obtained in the prediction technology. Since the frictional contact problem is related to historical loading, the incremental method is employed. The numerical results with different friction coefficients all show the effectiveness and convergence of the proposed algorithm and the effectiveness of the slip direction prediction technology.
  查看/发表评论  下载PDF阅读器
您是第8806162位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计