欢迎光临《计算力学学报》官方网站!
付朋真,陈江涛,张培红.基于多可信度代理模型的导弹气动数据生成技术研究[J].计算力学学报,2025,42(5):714~721
本文二维码信息
码上扫一扫!
基于多可信度代理模型的导弹气动数据生成技术研究
Research on missile aerodynamic data generation technology based on multi-credibility proxy model
投稿时间:2024-06-12  修订日期:2024-07-29
DOI:10.7511/jslx20240612002
中文关键词:  气动数据  多可信代理模型  高低可信度样本点比例  K-means聚类算法
英文关键词:erodynamic data  multi-trusted proxy model  the proportion of high and low confidence sample points  K-means clustering algorithm
基金项目:国家数值风洞工程项目(NNW);国家自然科学基金(52175214);国家自然科学基金委员会-中国工程物理研究院NSAF联合项目(U2230208)资助.
作者单位E-mail
付朋真 西南科技大学 计算机科学与技术学院, 绵阳 621010  
陈江涛 中国空气动力研究与发展中心 计算空气动力研究所, 绵阳 621000  
张培红 中国空气动力研究与发展中心 计算空气动力研究所, 绵阳 621000 zph2s@sina.com 
摘要点击次数: 140
全文下载次数: 98
中文摘要:
      代理模型是气动数据生成的新研究方向,传统的代理模型方法依赖于大量高精度仿真模型的样本点及其响应值来确保模型的精度,多可信度代理模型通过融合多层的高可信度和低可信度模型,能在保持一定精度的同时降低计算成本,对降低导弹研发周期有着重要意义。本文以Co-Kriging模型为代表,对不同数量的低可信度样本点对多可信度模型的影响与最佳的高低可信度样本点比例展开研究,并提出一种适用于气动数据的多可信度代理模型采样方法,该方法在利用高低可信度气动数据一一映射关系,在低可信度气动数据上使用K-means聚类算法获得训练用的高可信度气动数据对应位置。应用到导弹气动数据预测中及三种多可信度代理模型构建中,其中Co-Kriging模型综合预测效果最优,推荐高低可信度样本数比例为1:4与1:3之间。
英文摘要:
      A surrogate model is a new research idea direction of aerodynamic data generation.A traditional surrogate model relies on a large number of high-precision simulation sample points and their responses values to ensure the accuracy of the model.A multi-credibility surrogate model can reduce the computational cost while maintaining a certain accuracy by integrating multi-layer high and low credibility models,which is of great significance for reducing a missile development cycle.In this paper,the influence of different numbers of low-confidence sample points on the multi-confidence model and the optimal ratio of high-low-confidence sample points are studied,and a multi-confidence sampling method suitable for aerodynamics data is proposed.It is applied to the construction of three multi-credibility surrogate models in the prediction of missile aerodynamic data,among which the Co-Kriging model has the best comprehensive prediction effect.The recommended ratio of high and low confidence sample size is between 1:4 and 1:3.
查看全文  查看/发表评论  下载PDF阅读器
您是第17167236位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计