欢迎光临《计算力学学报》官方网站!
吴阳,张楠,张欣刚,张树翠,姚文莉,齐朝晖.车载刚柔耦合系统被动隔振特征研究[J].计算力学学报,2025,42(4):638~645
本文二维码信息
码上扫一扫!
车载刚柔耦合系统被动隔振特征研究
Study on the vibration reduction characteristics of rigid-flexible coupling system on semi-trailer trains
投稿时间:2024-03-26  修订日期:2024-05-23
DOI:10.7511/jslx20240326002
中文关键词:  刚柔耦合  钢丝绳隔震器  被动隔振  模型降噪
英文关键词:rigid-flexible coupling  steel rope isolator  passive vibration isolation  model smoothing method
基金项目:国家自然科学基金(12202224;12272197);山东省自然科学基金(ZR2022MA066),大学生创新创业训练计划(202310429124)资助项目.
作者单位E-mail
吴阳 青岛理工大学 理学院, 青岛 266525  
张楠 青岛理工大学 理学院, 青岛 266525  
张欣刚 青岛理工大学 理学院, 青岛 266525 zhangxingang@qut.edu.cn 
张树翠 青岛理工大学 理学院, 青岛 266525  
姚文莉 青岛理工大学 理学院, 青岛 266525  
齐朝晖 大连理工大学 工业装备结构分析优化 与CAE软件全国重点实验室 工程力学系, 大连 116024  
摘要点击次数: 729
全文下载次数: 784
中文摘要:
      对细长型精密设备公路运输被动隔振问题进行数值研究。首先,提出一种ANSYS-MATLAB联合仿真方法构建柔性部件的动力学模型。随后,结合模型降噪方法构建设备-支撑架-隔振器-挂车运输系统的刚柔耦合动力学模型。最后,采用路面谱模拟颠簸路面条件进行动力学仿真。研究了钢丝绳隔振器的布局和柔性部件的刚柔耦合效应对被动隔振性能的影响。仿真结果表明,支撑架在承载运输过程中具有变形协调特征,如果隔振器在支撑架上均匀布置,则远离支撑点的隔振器对实际隔振效果的贡献较低,由此带来的承载不均问题限制了隔振性能的进一步提升。该研究对细长型刚柔耦合系统公路运输的早期隔振设计具有切实的应用价值。
英文摘要:
      In this paper,the passive vibration isolation problem encountered in highway transportation of slender precision equipment is numerical studied.First,a co-simulation method combining ANSYS and MATLAB is proposed to develop the dynamic model of flexible components.Then,the dynamic model incorporating rigid-flexible coupling of the "equipment-support frame-isolator-trailer" transportation system is developed by using the model smoothing method.Finally,the road spectrum is employed to simulate the bumpy road conditions.The study investigates the influences of the steel rope isolator layout and the rigid-flexible coupling effect of flexible components on passive vibration isolation performance.Simulation results demonstrate that the support frame exhibits coordinated deformation during the load-bearing transportation process.Isolators situated away from the support point contribute minimally to the actual vibration isolation effect,thereby posing an uneven load-bearing problem that constrains further enhancement of vibration isolation performance.This research holds practical significance for the initial design of vibration isolation systems for slender rigid-flexible coupling systems in highway transportation.
查看全文  查看/发表评论  下载PDF阅读器
您是第17412111位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计