欢迎光临《计算力学学报》官方网站!
孟朋,刘梦,吕娜,刚宪约,张帆.一种基于极小化极大接触压力的交界面修形新方法[J].计算力学学报,2023,40(4):641~646
本文二维码信息
码上扫一扫!
一种基于极小化极大接触压力的交界面修形新方法
A new profile modification method by minimizing the maximum contact pressure
投稿时间:2021-10-15  修订日期:2022-03-25
DOI:10.7511/jslx20211015001
中文关键词:  弹性接触修形  接触压力  极小极大模型  线性规划
英文关键词:profile modification of elastic interface  contact pressure  minimax model  linear programming model
基金项目:山东省自然科学基金(ZR2020ME140)资助项目.
作者单位E-mail
孟朋 山东理工大学 交通与车辆工程学院, 淄博 255000  
刘梦 山东理工大学 交通与车辆工程学院, 淄博 255000  
吕娜 山东理工大学 交通与车辆工程学院, 淄博 255000  
刚宪约 山东理工大学 交通与车辆工程学院, 淄博 255000 gangxianyue@sdut.edu.cn 
张帆 山东理工大学 交通与车辆工程学院, 淄博 255000  
摘要点击次数: 415
全文下载次数: 282
中文摘要:
      针对轴承和齿轮等零部件接触压力分布不均问题,提出了一种极小化极大接触压力的弹性交界面修形新方法,仅需要一次结构分析就可以实现理想的修形结果。基于弹性接触理论与有限元法,推导建立了接触节点修形量与接触压力之间的数学方程;以极小化各接触节点的最大接触压力为目标,建立了计算修形量的极小极大模型;并利用最优化方法将其转化为线性规划问题,有效提高了求解的全局收敛性和计算效率。通过两个弹性接触修形实例,验证了新方法对一般弹性接触修形问题的适用性和高效性。
英文摘要:
      A new profile modification method is proposed to optimize the distribution of contact pressure existing in elastic components,such as bearings and gears.Based on elastic contact theory and the finite element method,a mathematical equation is developed to formulate the relationship between the contact pressure distribution and the modification displacements of each node.Then a Minimax problem is developed to minimize the maximum contact pressure of each contact node.The modification displacements can be accurately solved from this problem with only one-time structural analysis.To improve the computation efficiency and global convergence,this Minimax problem is further transformed into a linear programming problem.The general applicability and high efficiency of the new profile modification method is validated with two profile modification examples.
查看全文  查看/发表评论  下载PDF阅读器
您是第12825349位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计