欢迎光临《计算力学学报》官方网站!
柴德望,丁千,张泉.利用重叠分离机构进行纸张分离的纸张动态分析[J].计算力学学报,2020,37(2):178~184
本文二维码信息
码上扫一扫!
利用重叠分离机构进行纸张分离的纸张动态分析
Dynamic analysis on the paper sheet separated by the overlap separation mechanism
投稿时间:2019-03-25  修订日期:2019-05-14
DOI:10.7511/jslx20190325007
中文关键词:  重叠分离机构  变形力  修正的库伦摩擦力  动力学方程
英文关键词:the overlap separation mechanism  deformation force  the modified Coulomb friction model  the dynamic equations
基金项目:
作者单位E-mail
柴德望 天津大学 力学系, 天津 300350  
丁千 天津大学 力学系, 天津 300350 qding@tju.edu.cn 
张泉 恒银金融科技股份有限公司博士后科研工作站, 天津 300308  
摘要点击次数: 766
全文下载次数: 663
中文摘要:
      介绍了重叠分离机构的工作原理,采用修正的库伦摩擦力模型建立纸张通过重叠分离机构的动力学方程,在纸张通过分离机构的过程中考虑了纸币所受变形力随时间的变化,并运用Matlab软件进行了数值仿真,分析了重叠分离机构对纸币分离的影响因素。结果表明,随着重叠分离机构的交叠量、剥离轮转矩和剥离轮摩擦系数的增加,对单张纸币通过分离机构延迟越大,而双张纸币通过分离机构时,对连张纸币的抑制作用增强,便于纸币分离;对于分离效果而言,剥离轮转矩的影响偏小。
英文摘要:
      The working principle of overlap separation mechanism is introduced.The dynamic equations of paper passing through the overlap separation mechanism are established by using the modified Coulomb friction model.The change of paper deformation force with time is considered in the process of paper passing through the overlap separating mechanism.The numerical simulation is carried out by using Matlab.The influence factors of overlap separating mechanism on paper separating are analyzed.The results show that:With the increase of overlap amount,torque and friction coefficient of separating wheel,the single note passing through the separation mechanism takes more time,while for double notes feeds,the restraining effect of the sticking note is strengthened,which is convenient for separating bills;for separating effect,the influence of separating wheel torque is small.
查看全文  查看/发表评论  下载PDF阅读器
您是第12825756位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计