| 朱向哲,佟莹,高鹤.四螺杆扰动下粘性流体混沌动力学特性研究[J].计算力学学报,2019,36(1):83~89 |
|
| 
码上扫一扫！ |
| 四螺杆扰动下粘性流体混沌动力学特性研究 |
| Study on the chaotic dynamic properties of viscous fluid in four-screw extruders |
| 投稿时间：2017-11-11 修订日期：2018-01-08 |
| DOI：10.7511/jslx20171111001 |
| 中文关键词: 四螺杆挤出机 有限时间Lyapunov指数 拉格朗日拟序结构 Poincaré截面 |
| 英文关键词:four-screw extruder numerical simulation Lagrangian coherent structures Poincaré section |
| 基金项目:国家自然科学基金（51473073；50903042）；辽宁省高校创新人才支持计划（LR2016022）资助项目. |
|
| 摘要点击次数: 1276 |
| 全文下载次数: 943 |
| 中文摘要: |
| 在螺杆的周期性扰动下，聚合粘性物流体在螺杆挤出机内的运动具有混沌特性。区别于传统欧拉方法，从Lagrangian新视角分析了四螺杆扰动下粘性流体的混沌动力学特性。基于有限时间不变流形理论，计算了四螺杆挤出机不同初始时刻位的有限时间Lyapunov指数FTLE和拉格朗日拟序结构LCS；利用LCS准边界特性分析了四螺杆挤出系统不同区域的流体运动的动力学特性，指出了抑制和促进四螺杆流体输运的局部区域；结合Poincaré截面验证了分析结果的正确性。结果表明，在同向旋转四螺杆的周期性扰动作用下，四螺杆挤出机中心区由LCS包围，成为流体输运的死区。通过改变螺杆的扰动方向，可以消除中心区LCS的封闭结构，强化异向旋转四螺杆挤出机的物质交换，有效提高了设备的混合效率。 |
| 英文摘要: |
| Under the periodic disturbance of the screws,the fluid motion of viscous polymer melt in the screw extruder has the characteristics of chaos.Different from the traditional Euler method,in this paper,the Lagrangian method was used to investigate the fluid transport properties in the four-screw extruders.Based on the finite time invariant manifold theory,the finite time Lyapunov exponent (FTLE) and Lagrangian coherent structures (LCS) of the four-screw extruders were calculated considering the different initial time.The LCS as a boundary separated three regions with different mixing characteristics in the screw extruders,in which the local regions with poor or good mixing performances were also identified.The accuracy of LCS patterns was verified by comparing with Poincaré section.The results show that the center region of the co-rotating four-screw extruder is surrounded by a closed LCS under the periodic disturbance of the co-rotating four screws.Therefore,the center region is a dead region of fluid transportation.By changing the rotating direction of the four screws,the closed LCS surrounding the center region is eliminated.This results in the increase of material exchange and mixing efficiency in the counter-rotating four-screw extruder. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
