欢迎光临《计算力学学报》官方网站!
刘伟杰,胡平,Khemais Saanouni,张向奎.基于微态方法的耦合韧性损伤的弹塑性本构模型[J].计算力学学报,2018,35(4):444~450
本文二维码信息
码上扫一扫!
基于微态方法的耦合韧性损伤的弹塑性本构模型
The elastoplastic constitutive model coupled with ductile damage based on micromorphic approach
投稿时间:2017-04-05  修订日期:2017-07-28
DOI:10.7511/jslx20170405003
中文关键词:  微态方法  弹塑性模型  韧性损伤  内部特征尺度  应变软化
英文关键词:micromorphic approach  elastoplastic constitutive model  ductile damage  internal length scale  strain-softening
基金项目:国家自然科学基金(10932003,11472071);法国自然科学基金(ANR-14-CE07-0035-01)资助项目.
作者单位E-mail
刘伟杰 大连理工大学 工业装备结构分析国家重点实验室, 大连 116024
ICD/LASMIS, University of Technology of Troyes, Troyes 10000 
 
胡平 大连理工大学 工业装备结构分析国家重点实验室, 大连 116024 pinghu@dlut.edu.cn 
Khemais Saanouni ICD/LASMIS, University of Technology of Troyes, Troyes 10000  
张向奎 大连理工大学 工业装备结构分析国家重点实验室, 大连 116024  
摘要点击次数: 2249
全文下载次数: 1099
中文摘要:
      基于广义连续介质力学提出了一个热力学一致性的耦合微态韧性损伤的弹塑性本构模型。该模型遵循Forest的微态方法,在有限变形中提出引入额外的微态损伤因子及其一阶梯度以考虑材料的内部特征尺度。通过广义虚功原理得到了微态损伤的补充控制方程,对亥姆霍兹自由能进行扩展,得到了新的包含微态损伤变量的损伤能量释放率,在微态损伤的正则化作用下,采用隐式迭代更新局部损伤和应力等状态变量。基于Galerkin加权余量法,推导了以传统位移和微态损伤为基本未知量的有限元列式。利用该数值模型,对DP1000材料的单向拉伸实验和十字形零件的冲压实验进行了应变局部化与材料断裂的有限元分析。结果表明,该微态弹塑性损伤模型可以得到一致的有限元模拟响应曲线并收敛到实验曲线,从而避免发生网格依赖性问题。
英文摘要:
      A thermodynamically-consistent micromorphic constitutive model fully coupled with ductile damage is formulated based on the generalized continuum mechanics.This model following the micromorphic approach proposed by Forest,introduces the new micromorphic damage and its first gradient to extend the local continuum damage model incorporating with the material characteristic length scale.Using the generalized principle of virtual work leads to the additional balance equations associated with micromorphic damage.The new damage energy release rate is derived from the extended Helmholtz free energy and regularized by the micromorphic damage.The micromorphic damage model as well as the classical displacements are implemented in finite element method.The numerical study of strain-softening and cracking in uniaxial tensile test and the cross-section drawing process of the DP1000 is performed.It is pointed out that the problem of mesh-dependency is avoided and the converged system responses are obtained and found to be consistent with experimental curves.
查看全文  查看/发表评论  下载PDF阅读器
您是第13580025位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计