李德如,刘扬,鲁乃唯,张海萍,江楠.基于LHS-Kriging法的正交异性钢桥面板疲劳可靠度分析[J].计算力学学报,2018,35(4):408~416 |
| 码上扫一扫! |
基于LHS-Kriging法的正交异性钢桥面板疲劳可靠度分析 |
Fatigue reliability analysis of orthotropic steel bridge deck based on LHS-Kriging method |
投稿时间:2017-05-02 修订日期:2017-10-08 |
DOI:10.7511/jslx20170502001 |
中文关键词: 桥梁工程 正交异性钢桥面板 疲劳可靠度 随机车流 LHS Kriging方法 |
英文关键词:bridge engineering orthotropic steel bridge deck fatigue reliability random traffic flow LHS Kriging method |
基金项目:国家自然科学基金(51378081);国家重点基础发展计划(973计划)(2015CB057701,2015CB057706);湖南省研究生创新项目(CX2016B387);交通基础设施安全风险管理行业重点实验(长沙理工大学)项目(16BCX07)资助项目. |
|
摘要点击次数: 2379 |
全文下载次数: 1165 |
中文摘要: |
为解决随机车载下正交异性钢桥面板疲劳应力谱有限元求解耗时问题,采用拉丁超立方抽样(LHS)与Kriging方法,建立了快速获取随机车流作用下细节疲劳应力谱的LHS-Kriging有限元替代模型,并将此模型应用于南溪长江大桥正交异性钢桥面板疲劳可靠度计算。结果表明,基于LHS-Kriging方法的有限元替代模型, 不需要经过大量车辆荷载的有限元加载,可直接快速获取细节疲劳应力谱;与传统的响应面法(RSM)相比,Kriging法预测的细节等效疲劳应力更符合有限元计算结果;随着交通量增长率的增大,桥梁的疲劳可靠度显著减少;100年后,当交通量增长率为3%和5%时,正交异性桥面板与纵肋焊接处的细节疲劳可靠度小于2。 |
英文摘要: |
In order to solve the time-consuming problem of finite element solution of fatigue stress spectrum of orthotropic steel bridge under random vehicles,Latin Hypercube Sampling(LHS)and Kriging method were used to establish a LHS-Kriging finite element replacement model for quickly obtaining the detailed fatigue stress spectrum under random traffic flow.And the proposed replacement model was applied to fatigue reliability calculation of orthotropic steel bridge decks of Nanxi Yangtze River Bridge.The results show:the detailed fatigue stress spectrum can be rapidly obtained by the LHS-Kriging finite element replacement model without large number of finite element analyses;compared with the RSM method,the predicted value of the Kriging method is more consistent with finite element calculation;with the increase of traffic growth rate,the fatigue reliability of bridge is significantly reduced;after 100 years,the fatigue reliability between the orthotropic bridge deck and longitudinal rib welding is less than 2 when the traffic growth rate is 3% and 5%. |
查看全文 查看/发表评论 下载PDF阅读器 |