欢迎光临《计算力学学报》官方网站!
郭聪,罗景润.基于整体位移模式的平面裂纹结构数值模拟方法[J].计算力学学报,2018,35(2):249~254
本文二维码信息
码上扫一扫!
基于整体位移模式的平面裂纹结构数值模拟方法
A numerical simulation method based on the displacement mode of entirety for plain crack structure
投稿时间:2016-10-17  修订日期:2017-01-11
DOI:10.7511/jslx20161017001
中文关键词:  数值模拟  扩展有限元法  无网格伽辽金法  整体位移模式  刚度矩阵  裂纹
英文关键词:numerical simulation  extended finite element method  element free Galerkin method  entire displacement mode  stiffness matrix  crack
基金项目:
作者单位E-mail
郭聪 中国工程物理研究院 总体工程研究所, 绵阳 621900  
罗景润 中国工程物理研究院 总体工程研究所, 绵阳 621900 luojr@caep.cn 
摘要点击次数: 1403
全文下载次数: 968
中文摘要:
      对于平面裂纹问题,针对扩展有限元法和无网格伽辽金法的不足,从结构的整体位移模式出发,提出了一种新的数值模拟方法。在整个求解域内构造其试探函数,并引入裂纹修正项描述裂尖处的奇异性和裂纹面的强间断特性;同时,提出了一种新的强制边界条件施加方法,通过引入位移边界水平集函数,将位移边界条件包含在近似位移场的表达式中,有效地解决了位移边界条件问题,减小了刚度矩阵的阶数,非常方便地消除了刚度矩阵的奇异性,降低了线性方程组的求解难度。含裂纹矩形平板结构的数值算例验证了该方法的有效性。
英文摘要:
      A new kind of numerical simulation method for plain crack problem is proposed in the paper which is based on the displacement mode of the entire structure on the consideration of the insufficiency of XFEM and EFGM. In this method,trial functions are constructed within the whole solution area,meanwhile the crack modification terms are introduced in to describe the singularity on the crack tip and the displacement gap on the crack surfaces.This paper also proposes a new kind of method for the displacement boundary problem by introducing displacement level set function and involving the displacement boundary condition in the formula of the approximate displacement field,thus the stiffness matrix size is reduced and the singularity of the matrix is eliminated.As a result the difficulty to solve the linear equation set is decreased.A numerical example of a rectangle plate with crack validates the method.
查看全文  查看/发表评论  下载PDF阅读器
您是第12828482位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计