欢迎光临《计算力学学报》官方网站!
梁永钦,王立成.混凝土保护层锈胀开裂过程分析的细观刚体弹簧元模型[J].计算力学学报,2017,34(5):541~546
本文二维码信息
码上扫一扫!
混凝土保护层锈胀开裂过程分析的细观刚体弹簧元模型
Mesoscale Rigid-Body-Spring Model for analyzing the crack propagation of concrete cover due to steel bar corrosion
投稿时间:2016-07-14  修订日期:2016-11-12
DOI:10.7511/jslx201705002
中文关键词:  混凝土保护层  钢筋锈蚀  裂缝扩展  细观刚体弹簧元法  数值模拟
英文关键词:concrete cover  steel bar corrosion  crack propagation  mesoscale Rigid-Body-Spring Model  simulation
基金项目:国家自然科学基金面上项目(51378090);国家重点基础研究发展计划(973计划)(2015CB057703;2015CB057701)资助项目.
作者单位E-mail
梁永钦 大连理工大学 海岸和近海工程国家重点实验室, 大连 116024  
王立成 大连理工大学 海岸和近海工程国家重点实验室, 大连 116024 wanglicheng2000@163.com 
摘要点击次数: 1829
全文下载次数: 1554
中文摘要:
      建立了描述保护层锈胀开裂过程的细观刚体弹簧元模型(RBSM),获得了锈胀裂缝的扩展过程和保护层的力学响应。数值结果表明,锈胀裂缝开展过程与试验现象较为一致;混凝土采用弹性本构关系时,平均锈胀压力-径向位移曲线的斜率(模型刚度)与厚壁圆筒模型理论值接近;采用软化本构关系时,平均锈胀压力峰值与理论值接近,从而验证了本文模型的正确性。此外,探讨了保护层厚度和钢筋直径对锈胀过程力学响应的影响规律。结果表明,保护层厚度减小将导致峰值锈胀压力和径向位移降低;钢筋直径增大同样会导致峰值锈胀压力降低,对应的径向位移整体上呈现随钢筋直径增大而减小的趋势。
英文摘要:
      In order to obtain the crack propagation process and mechanical response of concrete cover induced by steel bar corrosion,a numerical model based on the mesoscale Rigid-Body-Spring Model (RBSM) was established in the present work.The results show that the crack pattern is in good agreement with the experimental observations,and the model stiffness is similar to that obtained when the theoretical model for concrete composite materials,while the peak averaged corrosion pressure calculated with a softening constitutive model for concrete is also similar to that of the theoretical model,thus the numerical model is yalidated.Then the effects of concrete cover thickness and steel bar diameter on mechanical response during the corrosion process were investigated.The results show that the peak corrosion pressure and displacement decrease with the decreasing concrete cover thickness.The increase in steel bar diameter will bring about the decrease of the peak corrosion pressure,and the corresponding displacement presents a decreasing tendency on the whole.
查看全文  查看/发表评论  下载PDF阅读器
您是第13574492位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计