欢迎光临《计算力学学报》官方网站!
李龙龙,王立成.基于能量守恒理论的带肋钢筋-混凝土粘结滑移本构关系研究[J].计算力学学报,2017,34(1):68~75
本文二维码信息
码上扫一扫!
基于能量守恒理论的带肋钢筋-混凝土粘结滑移本构关系研究
Bond-slip constitutive model between ribbed steel bars and concrete based on the conservation law of energy
投稿时间:2015-09-06  修订日期:2016-04-14
DOI:10.7511/jslx201701009
中文关键词:  混凝土  粘结滑移  能量守恒  带肋钢筋  劈裂破坏
英文关键词:concrete  bond-slip  energy conservation law  ribbed bars  splitting failure
基金项目:国家重点基础研究发展计划(973计划)(2015CB057703);国家自然科学基金面上项目(51378090)资助项目
作者单位
李龙龙 大连理工大学 海岸和近海工程国家重点实验室, 大连 116024 
王立成 大连理工大学 海岸和近海工程国家重点实验室, 大连 116024 
摘要点击次数: 2995
全文下载次数: 1685
中文摘要:
      针对钢筋-混凝土粘结滑移的劈裂破坏模式,将整个破坏过程分为未开裂的弹性阶段和带裂缝阶段。弹性阶段采用弹性厚壁圆筒模型,带裂缝阶段采用考虑混凝土软化特性的厚壁圆筒模型。基于这两种模型,研究了粘结滑移劈裂破坏过程的能量变化规律,推导出了两种模型的能量计算公式。利用能量守恒定律建立了钢筋-混凝土粘结滑移本构关系的微分方程,并通过数值积分方法得到了粘结滑移本构模型。该本构模型能够体现混凝土与钢筋材料参数和几何参数的影响,对不同形状的粘结滑移关系曲线具有较好的适应性。最后,将得到的本构关系与文献的试验结果进行对比,并分析了各参数的变化规律。
英文摘要:
      This paper concentrates on analytical solution of local bond stress-slip relationship between ribbed steel bars and concrete corresponding to the splitting model of bond failure.The uncracked process of concrete splitting in the cover depth is divided into elastic stage and cracked stage.The thick-walled cylinder model is used for the initial elastic stage,while the cracked thick-walled cylinder model with softening behaviour of concrete is applied for the latter cracked stage.The energy equation of the two models is presented and the variation characteristic of energy during the process of splitting is discussed.Based on the energy conservation law,the differential equation accounting for bond stress-slip relationship is derived,which is used to obtain the local bond stress-slip relationship by numerical integration.The model shows good agreement with the available experimental results and accounts for the parameters of concrete and steel,which influence the local bond stress-slip response as observed in the experiment.Finally,the theoretical and the experimental results are compared and analysed.
查看全文  查看/发表评论  下载PDF阅读器
您是第13576039位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计