郑劼恒,蒋明,郭芮,李国栋.顺序输送管道水力瞬变模拟的有限体积法[J].计算力学学报,2015,32(3):418~422,428 |
| 码上扫一扫! |
顺序输送管道水力瞬变模拟的有限体积法 |
Finite volume method for hydraulic transient simulation of batching pipeline |
投稿时间:2014-05-22 修订日期:2014-08-23 |
DOI:10.7511/jslx201503019 |
中文关键词: 顺序输送 水力瞬变 有限体积法 Rieman求解器 MUSCL格式 |
英文关键词:batching pipeline hydraulic transient finite volume method Rieman solver MUSCL-type scheme |
基金项目:重庆市科技攻关(cstc2012gg-sfgc00002);后勤工程学院学术创新(YZ08-43601)资助项目. |
|
摘要点击次数: 2013 |
全文下载次数: 1933 |
中文摘要: |
针对顺序输送水力瞬变中输送介质不连续的情况,提出采用有限体积法取代传统的特征线法进行求解,以减少插值误差。首先得到水击基本方程基于压力-流速的非守恒有限体积离散格式,通过Rieman求解器得到控制体界面的Rieman解。采用MUSCL-Hancock Primitive方法进行界面数值重构与时间推进,构建时空二阶精度的TVD格式。边界的处理采用Rieman不变量与构造虚拟边界节点相结合的方法,使其与整体精度保持一致。数值计算与实验对比,证明了本文算法能有效抑制非物理振荡,具有精度高、鲁棒性好的特点。 |
英文摘要: |
To minimize the interpolating errors,a finite volume method is proposed in this paper concer-ning the discontinuity of the transportation media in batching,which is an alternative for the traditional MOC.Firstly,a finite volume,pressure-velocity based nonconservative scheme is derived from the tran-sient flow model of batching pipeline.The Rieman solvers are used for calculating the state in the interface of a control volume in the scheme.Then a MUSCL-Hancock Primitive method,which is TVD and second-order accurate both in space and time,is introduced in the process of reconstruction of the interface state and time evolution.In dealing with the boundary conditions,the method of Rieman invariants and the construction of the virtual boundary are combined,which is also second-order accurate.Finally,through comparing the results of numerical calculation with that of the experiments,it is proved that the method proposed by this paper can effectively inhibit the nonphysical oscillations and is characterized by high precision and robustness. |
查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|
|