欢迎光临《计算力学学报》官方网站!
朱丹阳,张亚辉.考虑轮轨脱离的车桥耦合系统动力响应分析[J].计算力学学报,2015,32(3):359~365
本文二维码信息
码上扫一扫!
考虑轮轨脱离的车桥耦合系统动力响应分析
Dynamic response analysis of vehicle-bridge coupled systems considering separation
投稿时间:2014-03-14  修订日期:2014-05-02
DOI:10.7511/jslx201503010
中文关键词:  车桥耦合系统  轮轨脱离  线性互补关系
英文关键词:vehicle-bridge coupled system  separation  linear complementarity problem
基金项目:国家自然科学基金(11172056);国家重点基础研究发展计划(2014CB046803)资助项目.
作者单位E-mail
朱丹阳 大连理工大学 工业装备结构分析国家重点实验室, 大连 116023  
张亚辉 大连理工大学 工业装备结构分析国家重点实验室, 大连 116023 zhangyh@dlut.edu.cn 
摘要点击次数: 2326
全文下载次数: 1631
中文摘要:
      针对密贴和弹簧连接两种轮轨关系模型,通过构造车轮与桥梁之间相对位移和相互作用力间的线性互补关系,建立了两种考虑轮轨脱离的车桥耦合系统动力学分析模型,从而将车桥耦合系统的轮轨连接问题转化为标准的线性互补问题。本文方法不需要在每一个时间步对接触状态进行判断,避免了传统算法的迭代求解过程,能够对轮轨脱离进行模拟。在数值算例中,讨论了无量纲化的车桥耦合系统质量、刚度等参数和行驶状态对系统响应动力放大系数的影响,以及速度因子和车桥质量因子对轮轨脱离的影响。数值算例证明了本文方法的正确性,且相对于传统轮轨接触模型具有更高的计算效率。
英文摘要:
      By introducing the linear complementarity relationship between the relative displacement of the wheel and rail and the interaction force in the rigid contact model and elastic contact model,two analytical models considering the separation between the wheel and the bridge are established,which transform the dynamic interaction problem of the vehicle-bridge coupled system into a standard linear complementarity problem.Therefore the complex trial-and-error and iterative process in conventional numerical method are avoided,and the assumptions or iterative process for the determination of contact states are not required in the proposed method.The effects of non-dimensional mass,stiffness of the coupled system and running state of the vehicle on the dynamic magnification factors are studied,the separation regions due to the velocity ratio and the mass ratio (vehicle to bridge) are also investigated.Numerical examples demonstrate the efficiency and accuracy of the proposed method.
查看全文  查看/发表评论  下载PDF阅读器
您是第12828713位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计