欢迎光临《计算力学学报》官方网站!
韩小进,孙慧玉.三维编织复合材料渐进损伤的非线性模型及强度分析[J].计算力学学报,2012,29(5):783~788
本文二维码信息
码上扫一扫!
三维编织复合材料渐进损伤的非线性模型及强度分析
A nonlinear progressive damage model and strength analysis for 3D braided composites
投稿时间:2011-07-19  修订日期:2011-12-28
DOI:10.7511/jslx20125024
中文关键词:  三维编织复合材料  渐进损伤  强度  数值模拟  有限元
英文关键词:3D braided composites  progressive damage  strength  numerical simulation  FEM
基金项目:国家自然科学基金(10972101);教育部留学回国人员科研启动基金资助项目.
作者单位E-mail
韩小进 南京航空航天大学 机械结构力学及控制国家重点实验室, 南京 210016  
孙慧玉 南京航空航天大学 机械结构力学及控制国家重点实验室, 南京 210016 hysun@nuaa.edu.cn 
摘要点击次数: 2207
全文下载次数: 1523
中文摘要:
      建立了考虑周期性位移边界条件的细观体胞模型,对三维编织复合材料的渐进损伤过程进行数值模拟。采用Eshelby-Mori-Tanaka方法计算含损伤裂纹的材料的刚度矩阵,并将有限元网格尺寸和单元裂纹尺寸引入损伤演化方程,有效地降低了模拟结果对有限元网格的依赖程度。通过计算得到了材料应力应变的非线性关系和失效时的极限强度,并分析了材料的破坏机理。结果表明,大编织角材料的破坏模式主要是基体失效与纤维横向拉剪破坏,模拟计算结果与文献中的实验值吻合较好。
英文摘要:
      A representative volume unit cell for 3D four-step braided composites with the periodic boundary condition was established to simulate the progressive damage behaviors.The Eshelby-Mori-Tanaka method was applied to calculate the stiffness matrix of damaged materials.In order to alleviate the mesh dependence,the size of the finite element and the crack were considered in the damage evolution equation.The non-linear stress-strain relationship and the critical tensile strength were obtained through numerical simulation,and the failure mechanism of composites with large braiding angle was also discussed.It is shown that the main failure modes of composites with large braiding angle are matrix cracking,transverse tensile and shear failure of yarns.The results in the paper agree well with the experiments in the literature.
查看全文  查看/发表评论  下载PDF阅读器
您是第13575302位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计