欢迎光临《计算力学学报》官方网站!
唐义军,罗建辉.基于改进位移模式的一维C1有限元超收敛算法[J].计算力学学报,2012,29(5):721~725
本文二维码信息
码上扫一扫!
基于改进位移模式的一维C1有限元超收敛算法
Algorithm of super-convergent in one-dimensional C1 FEM based on improved displacement mode
投稿时间:2011-06-30  修订日期:2011-10-31
DOI:10.7511/jslx20125014
中文关键词:  有限元  前处理  位移模式  一维C1问题  超收敛
英文关键词:FEM  pre-processing  displacement mode  one-dimensional C1 problem  super-convergence
基金项目:湖南省自然科学基金(08JJ3011)资助项目.
作者单位E-mail
唐义军 湖南大学 土木工程学院, 长沙 410082 yijuntang168@163.com 
罗建辉 湖南大学 土木工程学院, 长沙 410082  
摘要点击次数: 2256
全文下载次数: 2018
中文摘要:
      提出了基于改进位移模式的一维C1有限元超收敛算法。利用单元内部需满足平衡方程的条件,推导了超收敛计算解析公式的显式,即将高阶有限元解的位移模式用常规有限元解的位移模式表示。用常规有限元解的位移模式与高阶有限元解的位移模式之和构造新的位移模式。采用积分形式推导了单元刚度矩阵。该算法在前处理阶段使用了超收敛计算公式,在常规试函数的基础上,增加了高阶试函数,使得单元内平衡方程的残差减少,从而达到提高精度的目标。对于Hermite单元,本文的结点和单元的位移、导数都达到了h4阶的超收敛精度。
英文摘要:
      Algorithm of super-convergent in one-dimensional C1 FEM based on an improved displacement mode is presented.an explicit analytical formula of super-convergent calculating is derived with the conditions of equilibrium equations must be meet within the element,the displacement mode of high-order finite element solution is expressed with a conventional finite element solution,the new displacement model is constructed with the sum of the displacement model of conventional finite element and the high-order displacement model of finite element solution.The element stiffness matrix is derived using the integral form,the super-convergent formula is used for this algorithm at the stage of pre-processing for improving the accuracy of the solution and reducing the residual of balance equation,the higher-order trial functions is added at the foundation of the original trial function,the representative example is present for the Hermite element in this paper,the displacement and the derivative accuracy of nodes and elements have reached h4 order.
查看全文  查看/发表评论  下载PDF阅读器
您是第13574084位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计