欢迎光临《计算力学学报》官方网站!
盛鸣剑,叶正寅,蒋超奇.附面层修正应用于无网格算法的研究[J].计算力学学报,2011,28(6):920~925
本文二维码信息
码上扫一扫!
附面层修正应用于无网格算法的研究
Study of the boundary layer solution coupled with gridless method
投稿时间:2010-03-19  修订日期:2010-12-20
DOI:10.7511/jslx20116018
中文关键词:  无网格  Euler方程  AUSM+-up格式  附面层修正
英文关键词:gridless  Euler equations  AUSM+-up scheme  boundary layer solution
基金项目:
作者单位
盛鸣剑 上海飞机设计研究院, 上海 200232 
叶正寅 西北工业大学 翼型叶栅空气动力学国防重点实验室, 西安 710072 
蒋超奇 上海麟风风能科技有限公司, 上海 201508 
摘要点击次数: 2339
全文下载次数: 1277
中文摘要:
      研究了无网格算法中的附面层修正方法,在一种布置点云方法的基础上,发展一种曲面拟合的重构方式构造流场物理量;找出了无网格算法与网格算法之间的联系,成功将AUSM+-up格式移植到无网格算法当中,并应用于计算欧拉方程的数值通量;计算中采用了一种改进的隐式时间推进,并引入当地时间步长和残值光顺等加速收敛措施,成功的将附面层修正方法应用于无网格算法,对REA2822翼型跨音速流动、NACA0012翼型跨音速流动和M6机翼跨音速流动的数值模拟结果表明本文发展的无网格算法能较好地模拟粘性流动。
英文摘要:
      In this paper, a boundary layer solution coupled with gridless method is investigated. On the base of the distributed clouds of points, a least-squares fitting and the AUSM+-up scheme is used to obtain the numerical flux. An improved implicit algorithm is used to advanced the flow equations in time, at the same time local time stepping technique and residual averaging are employed, and coupled a boundary layer solution with gridless method. In order to demonstrate the accuracy and rudeness of the method, REA2822 aerofoil in transonic flow, NACA0012 aerofoil in transonic flow and M6 wing in transonic flow are computed. The result demonstrates that the gridless method in this paper can be used for the simulation of complex shape flow well.
查看全文  查看/发表评论  下载PDF阅读器
您是第12825453位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计