欢迎光临《计算力学学报》官方网站!
郑山锁,张传超,李磊.考虑粘结滑移效应的型钢混凝土梁柱单元[J].计算力学学报,2011,28(6):909~914
本文二维码信息
码上扫一扫!
考虑粘结滑移效应的型钢混凝土梁柱单元
Bond-slip considered beam-column elements for concrete encased steel column
投稿时间:2010-04-08  修订日期:2010-05-28
DOI:10.7511/jslx20116016
中文关键词:  梁柱单元  粘结滑移  柔度法  纤维模型  非线性
英文关键词:steel reinforced concrete(SRC)  bond-slip  flexibility method  fiber model  nonlinear
基金项目:国家自然科学基金重大研究计划培育项目(90815005);国家自然科学基金(50978281,51108376)资助项目.
作者单位
郑山锁 西安建筑科技大学, 西安 710055 
张传超 西安建筑科技大学, 西安 710055 
李磊 西安建筑科技大学, 西安 710055 
摘要点击次数: 1843
全文下载次数: 2266
中文摘要:
      本文建立了一种适用于型钢混凝土梁柱构件的非线性梁柱单元,并在建模中考虑了粘结滑移效应。根据型钢混凝土自由体的受力特点,建立了考虑界面粘结滑移时单元的控制微分方程和变形协调方程。基于有限单元柔度法和纤维模型的基本思想,选取了合适的力的插值函数。根据最小势能原理,推导了单元的柔度矩阵,提出了基于柔度法的单元状态确定方法。最后,通过数值计算结果与试验结果的对比,对本文建立的模型适用性和准确性进行了验证。结果表明,计算结果与试验结果吻合较好,计算精度高,且计算速度快。
英文摘要:
      This paper presents a new steel reinforced concrete (SRC) finite element that explicitly accounts for the slip between the steel and the surrounding concrete. According to the force characteristics of steel reinforced concrete (SRC) free body,the equations of equilibrium and compatibility are established. Based on the analytical model of force-based beam-column elements and fiber-section, the appropriate force interpolation function is determined. According to the principle of minimum potential energy,the flexibility matrix and the analytical for element state determinations are proposed.Finally,comparison with the experimental test on steel reinforced concrete (SRC)columns shows that the prediction with the new model is in good agreement with the test, and the model is of high accuracy and calculation speed.
查看全文  查看/发表评论  下载PDF阅读器
您是第12824892位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计