| 黄海明,徐晓亮,章梓茂.剥蚀引起的球锥体两相绕流效应[J].计算力学学报,2011,28(3):366~370 |
|
| 
码上扫一扫！ |
| 剥蚀引起的球锥体两相绕流效应 |
| Effect of two-phase flow past sphere-conic surface caused by denudation |
| 投稿时间：2010-02-16 修订日期：2010-04-22 |
| DOI：10.7511/jslx201103011 |
| 中文关键词: 烧蚀 剥蚀 两相流 离散涡方法 |
| 英文关键词:ablation denudation two-phase flow discrete vortex method |
| 基金项目: |
|
| 摘要点击次数: 1818 |
| 全文下载次数: 1339 |
| 中文摘要: |
| 基于多学科理论建立了极端环境下球锥体烧蚀、剥蚀的数理模型。利用离散涡方法计算流场与球锥表面压力分布,采用三方程烧蚀模型计算热化学控制机制下的烧蚀速率;引入颗粒轨道模型求解剥蚀颗粒的运动,编程计算高温高压燃烧室内球锥形烧蚀试件的绕流场及剥蚀颗粒的运动轨迹。研究表明:烧蚀对球锥体的绕流影响显著,球锥体的涡云较快地转变为不对称结构;且随着时间的增长,烧蚀球锥的线动量逐渐高于无烧蚀球锥的。剥落的颗粒总在涡云附近聚积,且随着涡云转变为不对称结构,颗粒的运动迹线不再对称,颗粒分布将逐渐变得杂乱无章。该研究可为热防护设计提供参考。 |
| 英文摘要: |
| Based on multi-disciplinary theory, a numerical model for solving ablation, denudation in a high temperature and high pressure environment is proposed. In this model, the discrete vortex method (DVM) is used in simulating flow field and pressure distribution on the sphere-conic surface; a commonly three-equations model under the thermal-chemical control mechanism is introduced for resolving the ablation loss after compared with the results under the diffusion control mechanism; furthermore, the denudation loss is simplified by releasing a series of particles on the sphere-conic surface at regular intervals, and a trajectory model is adopted for solving the particles motion. Codes are written and performed well for simulating the flow field and particles motion in a high temperature and high pressure blaster chamber. As results indicated, the ablation results in a remarkable effect on the sphere-conic surface and the vortex contour changes to a asymmetric structure; as time goes on, the linear momentum of the ablating sphere-conic surface becomes larger than the non-ablating one. The particles are accumulated at the vortex contour, when the vortex contour turns to an asymmetric structure, the particle traces are no longer symmetric, and the particle distribution will be haphazard. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|
|
