欢迎光临《计算力学学报》官方网站!
胡潇毅,陶伟明,郭乙木.树木在风中摇曳的流固耦合数值模拟方法探索[J].计算力学学报,2011,28(2):302~308
本文二维码信息
码上扫一扫!
树木在风中摇曳的流固耦合数值模拟方法探索
Fluid-structure interaction simulation of a tree swaying in wind field
投稿时间:2009-12-07  修订日期:2010-12-02
DOI:10.7511/jslx201102027
中文关键词:  树木  流固耦合  数值方法  虚拟耦合面  边界配合
英文关键词:tree  fluid-structure interaction  numerical method  virtual coupling surface  boundary fitting
基金项目:中国国家自然科学基金(50976017);国家自然科学基金委员会重点(50736001)资助支持.
作者单位E-mail
胡潇毅 浙江农林大学 机电系,临安 311300 jimhxy08@zafu.edu.cn 
陶伟明 浙江大学 工程力学系,杭州 310027  
郭乙木 浙江大学 工程力学系,杭州 310027  
摘要点击次数: 4295
全文下载次数: 2837
中文摘要:
      树木在风中摇曳是一个流固耦合问题,但树的结构复杂,无法直接用已有的流固耦合数值方法来模拟。本文提出一种基于虚拟耦合面的流固耦合方法,该方法用一个虚拟的连续曲面把树冠包裹起来,在这个曲面上建立流固耦合关系,并将虚拟曲面上计算得到的风荷载作为树木结构的外力进行加载。虚拟耦合面本身不妨碍树木枝条的运动,且能避免在每个枝条、树叶上都建立耦合面的麻烦。本文的模型求解是基于一种无须移动流体网格的非边界配合流固耦合算法实现的,通过在MSC.Dytran软件接口插入自编模块即可实现。
英文摘要:
      A tree swaying in wind field is a fluid-structure interaction (FSI) problem, however, tree structure is very complicated and the problem cannot be simulated using the existing FSI simulation methods. A special FSI simulation method based on virtual coupling surface is proposed in this paper, and the method was realized by enclosing the tree canopy with a virtual continuous curved surface as fluid-structure interaction interface, the calculated wind load on the virtual curved surface was exerted onto the tree structure as an external load. The virtual coupling surface does not obstruct the motion of tree branches, and the difficulty of establishing coupling surface on every branch and leaves can be avoided. The solution algorithm of the numerical model is based on a non-boundary fitting FSI algorithm supplied by the MSC.Dytran code, and the method proposed can be easily implemented by inserting a user programmed module into the MSC.Dytran user programming interface.
查看全文  查看/发表评论  下载PDF阅读器
您是第12824371位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计