| 王保民,梅雪松,胡赤兵,邬再新.内圈离心位移对高速角接触球轴承刚度的影响[J].计算力学学报,2010,27(1):145~150 |
|
| 
码上扫一扫！ |
| 内圈离心位移对高速角接触球轴承刚度的影响 |
| Influence of inner ring centrifugal displacement on the stiffness of high-speed angular contact ball bearing |
| 投稿时间：2007-12-25 |
| DOI：10.7511/jslx20101024 |
| 中文关键词: 角接触球轴承 离心位移 接触刚度 轴承刚度 |
| 英文关键词:angular contact ball bearing centrifugal displacement contact stiffness bearing stiffness |
| 基金项目:教育部新世纪人才支持计划(NCET-04-0935);甘肃省自然科学研究基金计划(0809RJZA013)资助项目. |
|
| 摘要点击次数: 1756 |
| 全文下载次数: 1415 |
| 中文摘要: |
| 以弹性力学理论、滚动轴承动力学和沟道控制理论为基础,计算了角接触球轴承内圈在离心力作用下的径向位移,给出了计及内圈离心位移影响时,高速角接触球轴承滚动体与内、外圈的接触刚度与轴承整体的径向刚度、轴向刚度、角刚度的计算方法和相应程序。对7012／CD轴承的计算结果表明, 轴承内圈外径的离心位移随转速增加而增大,在高速条件下其值较大,不容忽视;轴承内圈离心位移对内圈接触刚度和轴承径向刚度影响较大,导致内圈接触刚度和轴承径向刚度相对增大;对外圈的接触刚度、轴承轴向刚度和角刚度的影响很小;随着转速的增加与内圈离心位移的增大,对轴承内圈接触刚度与轴承径向刚度的影响会更加明显。因此,为使高速角接触球轴承的刚度分析更加精确、更加接近实际,必须考虑内圈离心位移的影响。 |
| 英文摘要: |
| Based on the elastic theory, dynamics and raceway control theory of the rolling bearing, inner ring centrifugal displacement of angular contact ball bearing was calculated, considering the influence of inner ring centrifugal displacement the comprehensive method and its corresponding program were given for calculating the contact stiffness of balls and inner／outer raceways and radial, axial, angular stiffness of the whole bearing. Taking 7012／CD bearing as an example, the results show that, inner ring centrifugal displacement increases with the increase of rotation speed, when rotation speed is high its value is large and cannot be neglected; inner ring centrifugal displacement has great influence on inner contact stiffness of balls and bearing radial stiffness, in consideration of this influence inner contact stiffness of balls and inner ring and bearing radial stiffness increases comparatively and it has little influence on outer contact stiffness of balls, axial stiffness and angular stiffness of the bearing; inner ring centrifugal displacement increases with the increase of rotation speed, its influence on bearing stiffness becomes more significant. Therefore, in order to make analysis of bearing stiffness more accurate and close to the factual condition, the influence of bearing inner ring centrifugal displacement must be considered. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|
|
