欢迎光临《计算力学学报》官方网站!
吕继组,白敏丽,李晓杰,秦小勇,王军,于盛华,闫鸿浩.爆炸加工洞内自然通风三维数值模拟和模型实验研究[J].计算力学学报,2008,25(3):402~406
本文二维码信息
码上扫一扫!
爆炸加工洞内自然通风三维数值模拟和模型实验研究
Study on natural ventilation of explosive working cavity with 3D numerical-simulation and experiment
  
DOI:10.7511/jslx20083076
中文关键词:  自然通风,实验,三维数值模拟,爆炸加工洞
英文关键词:natural ventilation,experiment,3D numericalsimulation,explosion workshop
基金项目:
吕继组  白敏丽  李晓杰  秦小勇  王军  于盛华  闫鸿浩
大连理工大学能源与动力学院 大连116023(吕继组,白敏丽)
,大连理工大学工业装备国家重点实验室 大连116023(李晓杰,闫鸿浩)
,大连港重点工程指挥部 大连116004(秦小勇)
,大连爆炸加工研究所 大连116021(王军,于盛华)
摘要点击次数: 1795
全文下载次数: 9
中文摘要:
      为减少对环境污染而建造全球最大爆炸加工场地,建造之前需要对其进行深入研究,特别是自然通风问题。为此,本文对实际结构的1/6模型进行实验研究,同时采用三维瞬态数值模拟方法,对实际结构和1/6实验模型在自然通风条件下有害气体浓度衰减情况进行详细研究。通过数值模拟可以推导出1/6实验模型与实际结构有害气体衰减时间比例常数;并依据1/6模型实验结果,推测出实际结构有害气体排出时间,为实际结构设计提供理论支持。
英文摘要:
      To minimize the environment pollution,the biggest explosion workshop over the world is planned to construct.A deep investigation must be done in advance,especially on the natural ventilation.A 1/6 scale model is set to do experiment research.A 3D transient numerical simulation method is adopted to thoroughly study the attenuation of the toxic gas concentration under natural ventilation to full-scale and 1/6 scale models.Through the simulation,a scale constant of attenuation can be deducted between the 1/6 scale model and the full-scale model.With the experiment results of 1/6 model,the toxic gas exhaust time can be calculated to support the practical design in theory.
查看全文  查看/发表评论  下载PDF阅读器
您是第12823317位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计