欢迎光临《计算力学学报》官方网站!
隋允康,彭细荣.连续体结构考虑离散性目标的ICM方法[J].计算力学学报,2006,23(2):163~168
本文二维码信息
码上扫一扫!
连续体结构考虑离散性目标的ICM方法
ICM method with objective transformed by variable discrete condition for continuum structure
  修订日期:2004-05-11
DOI:10.7511/jslx20062030
中文关键词:  结构拓扑优化  ICM方法  棋盘格现象  网格依赖性  删除率
英文关键词:structural topological optimization,ICM method,checkerboard patterns,mesh dependence,the delete rate,
基金项目:中国科学院资助项目;北京市自然科学基金;北京市教委共建项目;美国MSC公司资助项目
隋允康  彭细荣
[1]北京工业大学工程数值模拟中心,北京100022 [2]清华大学深圳研究生院,深圳518055
摘要点击次数: 1683
全文下载次数: 8
中文摘要:
      为了使求解位移和应力约束下重量最轻的连续体结构拓扑优化问题的ICM(独立连续映射)方法得到更清晰的拓扑形式,引入拓扑变量离散性条件作为目标之一,与原目标组成多目标规划模型,使拓扑变量向0或1两端靠近,减小了删除率对结果的影响;用图形处理方法消除了棋盘格现象及网格依赖性;通过初选准有效约束及选择设计区域等,提高了求解效率。算例表明:改进后的算法虽然迭代次数比原算法略多,但更稳键,更实用。
英文摘要:
      ICM(Independent Continuous Mapping) method can solve topological optimization problems of continuum structure with weight objective subjected to displacement and stress constraints.To get clearer topology configuration,by introducing the discrete condition of topology variables and integrating with the original objective,an optimization model of multi-objective is formulated to force the topology variables to approach to 0 or 1,and the model cuts down the effect of delete rate on the result.The image-filtering method is employed to eliminate checkerboard patterns and mesh dependence problems.The computational efficiency is increased by selecting quasi-active displacement constraints and design region.Numerical examples indicate that the algorithm is more robust and more available,though the iterative loops of the modified algorithm is more than those of the origin algorithm.
查看全文  查看/发表评论  下载PDF阅读器
您是第13579366位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计