欢迎光临《计算力学学报》官方网站!
李刚,刘永.三维偏心结构的Pushover分析[J].计算力学学报,2005,22(5):529~533
本文二维码信息
码上扫一扫!
三维偏心结构的Pushover分析
Pushover analysis of 3D eccentric structures
  修订日期:2003-08-26
DOI:10.7511/jslx20055105
中文关键词:  Pushover分析  加载模式  偏心结构  时程分析
英文关键词:pushover analysis,load pattern,eccentric buildings,time-history analysis
基金项目:国家自然科学基金(5000800359895410)资助项目
李刚  刘永
大连理工大学工程力学系工业装备结构分析国家重点实验室,辽宁大连116023
摘要点击次数: 1464
全文下载次数: 8
中文摘要:
      Pushover分析方法近年来引起了地震工程界的广泛兴趣,我国新的抗震设计规范已将其作为大震下结构弹塑性变形分析的一种方法。结构不规则性是影响Pushover分析应用的一个主要因素,而加载模式的选取则是Pushover分析的一个关键问题。本文采用FEMA273建议的3种加载模式对两个典型的三维偏心结构(刚度偏心和质量偏心)进行了Pushover分析,并与非线性动力时程分析的结果进行了比较,给出了三维偏心结构Pushover分析加载模式选取的建议。
英文摘要:
      Pushover analysis has caused much interest in the field of earthquake engineering,and it is suggested as a nonlinear analysis method of the structural deformation under severe earthquake in the new seismic design code in China.Structural irregularity is one important factor that affects the application of pushover method,and selecting an appropriate load patterns is very important in pushover analysis.In the present paper,the pushover analysis of two typical eccentric 3D building structures is studied considering 3 common load patterns suggested by FEMA 273,using ETABS program.The results by pushover analysis are compared with those by nonlinear time history analysis,and some suggestions on the selection of load patterns for eccentric structures are given.
查看全文  查看/发表评论  下载PDF阅读器
您是第12828435位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计