| 黄庆学,申光宪,李慧剑,许将,李汉良.大型轧机油膜轴承锥套损伤问题研究[J].计算力学学报,2005,22(3):366~369 |
|
| 
码上扫一扫！ |
| 大型轧机油膜轴承锥套损伤问题研究 |
| Study on contact damage of sleeve of oil-film bearing in rolling mill |
| 修订日期：2003-03-31 |
| DOI：10.7511/jslx20053073 |
| 中文关键词: 油膜轴承 边界元法 锥套损伤 |
| 英文关键词:oil-film bearing,BEM,surface damages of sleeve |
| 基金项目:国家"十五"攻关项目(ZZ0113A02-0103)资助项目. |
| 黄庆学 申光宪 李慧剑 许将 李汉良 |
| [1]太原重型机械学院,太原030024 [2]燕山大学工程力学系,秦皇岛066004 [3]宝山钢铁股份有限公司热轧部,上海200941 |
| 摘要点击次数: 1526 |
| 全文下载次数: 8 |
| 中文摘要: |
| 利用弹塑性接触问题边界元法分析了轧机油膜轴承锥套与轧辊辊颈装配过程中的变形和载荷特性，讨论了接触应力和变形对锥套与辊颈损伤的影响，给出了防止锥套与辊颈装配过程损伤的具体改进措施。最后通过实验验证了理论分析结果和改进方案的正确性。 |
| 英文摘要: |
| BEM for elastio-plastic contact problem is employed to study the deformation and loading station of the sleeve and roller neck of film bearing in rolling mill under special way of assembly in this paper. It discussed the influence of surface damages of sleeve and roller neck caused by its contact pressure and deformation distribution. The new method had been given to reduce the wear of the contact surface between the sleeve and roller neck. The validity of the analysis and the modified scheme are proved by the experiments. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
