欢迎光临《计算力学学报》官方网站!
张志国,邹振祝,赵玉成.确定悬索桥主缆成桥线形的参数方程法[J].计算力学学报,2005,22(3):305~309
本文二维码信息
码上扫一扫!
确定悬索桥主缆成桥线形的参数方程法
Parameter equation methods for determination of main cable''''s profile of suspension bridges
  修订日期:2003-06-18
DOI:10.7511/jslx20053061
中文关键词:  悬索桥  主缆线形  解析解  参数方程
英文关键词:suspension bridge,the main cable's profile,analytical solution,parameter equation
基金项目:国家自然科学基金(19772029)资助项目.
张志国  邹振祝  赵玉成
哈尔滨工业大学航天工程与力学系,黑龙江哈尔滨150001
摘要点击次数: 1637
全文下载次数: 11
中文摘要:
      假设悬索桥主缆自重沿弧长均匀分布,加劲梁、桥面等其余恒载沿水平均匀分布,导出了悬索桥主缆成桥线形的参数方程解。然后由边界条件及连续性条件,建立了确定主缆成桥线形的非线性方程组。根据中跨方程组可求出成桥状态主缆张力水平分量和中跨端点处对应的参数,再由中跨与边跨主缆张力水平分量相等的假定,根据边跨方程组来确定边跨端点处的参数。这样,主缆吊点坐标计算最终被转换成求解一个非线性方程。本文采用拟牛顿法求解非线性方程组,采用对分法求解非线性方程,算例结果表明本文方法具有适合程序计算、收敛速度快、计算精度较高的特点。
英文摘要:
       Suppose the self-weight of main cable distributes uniformly along the curve length, and those of stiffening girder and bridge deck distributes uniformly along the horizontal length, the general solution of the main cable's profile formula after completion is derived. Then the nonlinear equation group of the main cable's profile is determined according to the boundary conditions and deformation compatibility condition. The horizontal component of the cable tension force and the corresponding parameters at the end points of the mid-span are derived according to the mid-span equations. After that, the parameters at the end point of the side-span are solved according to the equality of the horizontal components of the cable tension force between the mid-span and the side-span. Thus through solving a nonlinear equation, the coordinates of hanging points can be obtained. The quasi-Newton method is used to solve the nonlinear equation group and bisection method is used to solve the nonlinear equation. The result of the example shows that this method is easy for programming and has a rapid convergence. Also the results are of pretty high accuracy.
查看全文  查看/发表评论  下载PDF阅读器
您是第12825703位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计