欢迎光临《计算力学学报》官方网站!
肖诗云,林皋,李宏男.混凝土WW三参数率相关动态本构模型[J].计算力学学报,2004,21(6):641~646
本文二维码信息
码上扫一扫!
混凝土WW三参数率相关动态本构模型
WW three-parameter rate-dependent dynamic constitutive model
  修订日期:2003-04-02
DOI:10.7511/jslx20046115
中文关键词:  粘塑性  率相关  应变率  内变量  动力反应
英文关键词:viscoplastic,rate-dependent,strain rate,internal variable,dynamic response
基金项目:国家自然科学基金(59739180)资助项目.
肖诗云  林皋  李宏男
大连理工大学海岸及近海工程国家重点实验室,辽宁大连116024
摘要点击次数: 1573
全文下载次数: 8
中文摘要:
      根据一致粘塑性模型理论,结合所做的混凝土单轴动力特性试验,对常用的混凝土本构模型Willam—Warnke三参数模型进行改进,引入应变率的影响,推导了Willam—Warnke材料的动态率相关本构模型;并与试验的应力应变曲线进行比较,结果表明本文模型能够较好地反应混凝土的动力特性;最后,通过对一受冲击荷载的简支梁进行计算,并与线弹性及率无关塑性结果进行比较,结果表明考虑了应变率的影响后梁的动力特性发生了较大的变化。
英文摘要:
      Based on the concept of viscoplastic consistency model, a modified Willam-Warnke three-parameter viscoplastic model with the effect of strain rate on concrete taken into account is developed. The dynamic uniaxial stress-strain response of the experiments carried out by the authors are used as the database to establish the model. Compared this model with experimental results, it shows that the model can well represent uniaxial dynamic tension and compression behavior of concrete. To study the effect of strain rate on dynamic behavior of concrete structures, a simple supported beam subjected to an impact load at the middle of the span is analyzed as an example. Calculated results by employing the present model and those of the linear-elastic model and rate-independent plastic model are compared. It shows that the strain rate dependence of the material not only affects the magnitude of maximum stresses and maximum displacements of the beam, but also affects the stress distribution over the beam.
查看全文  查看/发表评论  下载PDF阅读器
您是第12827890位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计