欢迎光临《计算力学学报》官方网站!
唐志平,王文强.准静态离散元方法和线性粘弹性问题的模拟[J].计算力学学报,2003,20(1):3~7
本文二维码信息
码上扫一扫!
准静态离散元方法和线性粘弹性问题的模拟
Quasi-static DEM and its application to linear viscoelastic simulation
  修订日期:2001-03-20
DOI:10.7511/jslx20031002
中文关键词:  准静态离散元法 粘弹性 有效列方法
英文关键词:Quasi\|static Discrete Element Method (DEM), visco\|elasticity, active column method
基金项目:国家自然科学基金(19772050),高技术激光领域资助项目.
唐志平  王文强
[1]中国科学技术大学力学和机械工程系,安徽合肥230026 [2]中科院材料力学行为和设计重点实验室
摘要点击次数: 1675
全文下载次数: 11
中文摘要:
      离散元方法是近年发展起来的一种新数值方法,但原则上只能用于动态问题。从静力平衡条件出发建立了离散元系统的准静态演化方程并证明了系数矩阵具有对称正定、稀疏、带状分布等特点,适用于“有效列”方法求解,该解法比高斯消去法节省更多的内存和机时。通过引入广义Maxwell体的元间作用模型建立起线性粘弹性材料准静态响应的离散元模拟方法。该方法独立于传统动态离散元方法,是传统动态离散元方法的拓展,可望在更多领域获得应用。
英文摘要:
      Discrete Element Method (DEM) is one of the new\|concept numerical methods developed in recent years. which is applied to the dynamic problems in principle. Based on the static equilibrium conditions, the quasi\|static equations have been settled for discrete element system in this paper, and proved that the coefficient matrix of the equations is symmetric, positive defined, rare, and stripe distributed. An"active column method"is used for saving more RAM and calculation time than Gaussian method. By introducing the generalizedMaxwell model for the interaction between neighboring element pairs, the DEM method for simulating quasi\|static responses of linear viscoelactic materials has been established. The quasi\|static DEM is independent upon the traditional DEM, which is a supplement and development of traditional DEM. It will have more applications.
查看全文  查看/发表评论  下载PDF阅读器
您是第13576051位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计