| 段世慧,孙宪学.一种考虑拉弯耦合的复合材料层板的优化设计方法[J].计算力学学报,2002,19(3):349~352372 |
|
| 
码上扫一扫！ |
| 一种考虑拉弯耦合的复合材料层板的优化设计方法 |
| An optimum design method for composite laminates considering coupling effect between bending and tension |
| |
| DOI：10.7511/jslx20023074 |
| 中文关键词: 拉弯耦合 复合材料 结构优化设计 应变能原理 板壳结构 飞机设计 |
| 英文关键词:composite material,structural optimum design,engineering applications |
| 基金项目: |
| 段世慧 孙宪学 |
中国飞机强度研究所 西安710065
(段世慧，孙宪学，黄琦)
，中国飞机强度研究所 西安710065(陈文浦)
|
| 摘要点击次数: 1184 |
| 全文下载次数: 13 |
| 中文摘要: |
| 提出了以层压板分层为基本单位，用满应变设计层板厚度，以应变能原理调整分层比例的二级优化策略，给出了复合材料板壳结构铺层设计的方法，并将其编入COMPASS3．0版本中。工程应用表明，该方法实用可靠，设计效率高，优化设计软件COMPASS为工程技术人员提供了有效的设计手段。 |
| 英文摘要: |
| A optimum design method for composite laminates considering the bending and tension coupling effect is proposed in this paper. The method has the following two levels. On the first level, the laminate thickness is optimized by fully strained design criterion (FSD). Then the thickness ratio of the ply groups is adjusted by the contributions of their strain energy as the second level. The ply groups are divided into constant and variable parts, and only the variable part could be adjusted according to the designer's requirements. To decrease the numerical oscillation in FSD iteration, the relaxation parameter is used. Based on the present method, a new optimization procedure has been developed under COMPASS software (COMPosite structural Analysis and Synthesis System), and some engineering examples demonstrate the reliability and efficiency of the method. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
