| 蔡中义,李明哲.板材多点成形过程的有限元分析[J].计算力学学报,2002,19(3):270~275 |
|
| 
码上扫一扫！ |
| 板材多点成形过程的有限元分析 |
| Finite element analysis of the process of Multi-Point Forming for sheet metal |
| 修订日期：2000-12-06 |
| DOI：10.7511/jslx20023059 |
| 中文关键词: 板材多点成形,静力隐式,有限元法,数值模拟 |
| 英文关键词:sheet metal Multi-Point Forming,static implicit scheme,finite element method,numerical simulation |
| 基金项目:教育部跨世纪优秀人才专项基金项目，“十五”国家重点科技攻关项目 ( 2 0 0 1BA2 0 3B11) |
| 蔡中义 李明哲 |
吉林大学辊锻工艺研究所 长春130025
(蔡中义，李明哲)
，吉林大学辊锻工艺研究所 长春130025(付文智)
|
| 摘要点击次数: 1607 |
| 全文下载次数: 8 |
| 中文摘要: |
| 多点成形过程采用静力隐式格式进行数值模拟是比较合适的。本文建立了用于多点成形过程分析的静力隐式弹塑性大变形有限元方法 ,给出了对稳定迭代收敛过程效果较好的板壳有限单元模型、处理多点不连续接触边界的接触单元方法以及增量变形过程中应力及塑性应变计算的多步回映计算方法。基于这些方法编制了计算软件 ,应用该软件进行了矩形板的液压胀形过程及球形模具拉伸成形过程的有限元分析 ,数值计算结果与典型的实验结果及计算结果吻合很好。最后给出了球形、圆柱形目标形状的实际多点成形过程的数值模拟结果。 |
| 英文摘要: |
| The process of Multi-Point Forming (MPF) should be simulated by finite element with static implicit scheme. In this paper, an elastic plastic large deformation finite element approach based on the static implicit scheme for the simulation of MPF process of sheet metal is described. The shell element model, the contact element technique to simulate the contact interface and the multi-step Radial return method for the calculation of stresses and strains in the process of plastic increment deformation are formulated. The present methods are effective to stabilize the iteration process of static implicit scheme. According to those methods, a finite element analysis code for the simulation of sheet metal forming process is developed. The numerical results calculated by the code for hydrostatic bulging of rectangular sheet and for a two dimensional stretching with a hemispherical punch coincide with the typical testing and calculating results. The numerical results for the springback analysis of sheet metal forming with MPF cylindrical die and the simulation of forming process of sheet metal with MPF spherical die are also given in the paper. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
