| 刘有军,杨晓翔.锯齿型径向迷宫密封的数值研究[J].计算力学学报,2000,17(3):355~359 |
|
| 
码上扫一扫！ |
| 锯齿型径向迷宫密封的数值研究 |
| Numerical study on a crenellated radial labyrinth seal |
| 修订日期：1998-09-26 |
| DOI：10.7511/jslx20003064 |
| 中文关键词: 迷宫密封 流场模拟 数值分析 有限元法 锯齿型 |
| 英文关键词:labyrinth seal,flow field simulation,numerical analysis,FEM, |
| 基金项目:中国石油天然气总公司石油科技中青年创新基金资助项目 |
| 刘有军 杨晓翔 |
| [1]北京工业大学生物医学工程中心 [2]大庆石油学院机械系 |
| 摘要点击次数: 1572 |
| 全文下载次数: 8 |
| 中文摘要: |
| 数值研究了锯齿型径向迷宫密封的密封性能，对密封的内部流场进行了有限元模拟，展示了节流间隙中有效能流宽度及泄漏介质通流速度随齿插入长度变化的规律，得到了不同齿插入长度时的密封性能，发现密封性以并不是随着齿插八长度的增加而单调增加，而是存在一个最佳的齿插入长度。最佳齿插入长度时，尽管此时的节流间隙较宽，但由于间隙是流动的强烈偏转，使实际的有效通流面积减小，泄漏介质在节波间隙中因而可以获得较大的速度，所 |
| 英文摘要: |
| seal property of an axisymmetric radial labyrinth seal is numerically studied. Simulation of inner flow field of the labyrinth shows the variation of effective flow area in throttle clearance with tooth insert length, and the seal properties at different tooth insert length are obtained. It is found that the seal property does not always increase with the tooth insert length, but an optimum tooth insert length exists. Under condition of optimum tooth insert length, although the throttle clearance is wider, the effective flow area decrease because of flow deflection and contraction in the clearance, thus discharging media can reach a higher speed in the clearance, and the sealing property increase. It is improtant for labyrinth seal to achieve better seal effect with wider clearance. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
