欢迎光临《计算力学学报》官方网站!
王荣辉,曾庆元.板桁结构考虑局部屈曲空间计算的横向条带板段单元法[J].计算力学学报,1999,16(3):
 
板桁结构考虑局部屈曲空间计算的横向条带板段单元法
Transversestripe deck beam finite element method of considering local buckling space calculation forplate-truss composite structure
  修订日期:1997-10-08
DOI:10.7511/jslx19993041
中文关键词:  板桁结构  横向条带板段单元  局部屈曲  UL列式法
英文关键词:plate truss composite structure,transverse stripe deck,beam finite element,local buckling,U. L. formulation,
基金项目::铁道部科技发展基金资助项目
王荣辉  曾庆元
摘要点击次数: 1679
全文下载次数: 0
中文摘要:
      用有限个横向条带法构造了板桁组合结构板段考虑局部屈曲的空间位移模式。基于三维连续体的虚功增量方程,导出了横向条带板段单元的UL列式,并考虑了板段单元位形变化的影响。此计算方法自由度少,计算精度高,能用于大型板桁结构的几何非线性分析。文末计算了广东西江桥板桁组合结构模型梁,计算结果与实测结果吻合较好。
英文摘要:
      In this paper, a space displacement field on considering the deck local buckling for the plate truss composite is constructed by using transverse finite stripe. The Update Lagrangian formulations of deck beam finite element in transverse stripe are induced based on the three dimensional continuum virtual work incremental equilibrium equation, and the effect of large deformation is taken into consideration. This method has high accuracy and less degrees of freedom, especially for geometric non linear analysis of large plate truss composite structure. In the end of this paper. Guang Dong Xi Jian plate truss composite structure model steel bridge is calculated, the results are very close approximation to the test data.
查看全文  查看/发表评论  下载PDF阅读器
您是第13576539位访问者
版权所有:《计算力学学报》编辑部
本系统由 北京勤云科技发展有限公司设计